1 / 3
Filament Spool clamp (Malyan and others)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an alternative method to lock your spool in place. I was getting fed up of tediously winding 2 nuts on and off…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 190
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is an alternative method to lock your spool in place. I was getting fed up of tediously winding 2 nuts on and off the bolt everytime I changed the reel.
To use, just pinch the handle, slide along bolt so it buts up against the bearing, then release. It maybe a little stiff at first. I haven't tested it excessively so unsure how long it will last before fatiguing.
Print Settings
Printer:
Malyan M180
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25%
Category: 3D Printer Accessories