1 / 14
Cantilever Suspension for Axial SCX10 — image 1
1 / 14

Cantilever Suspension for Axial SCX10

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Cantilever Suspension to remove the rear shock towers, which gives you more options for bodies for your Axial SCX10

Rating
0 / 5
Likes
97
Downloads
353
Makes
0
Views
3,113
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

I made this Cantilever Suspension to remove the rear shock towers so you can have more options for bodies on you Axial SCX-10.

My Main goal was to use the stock shocks to keep the cost down. You will need to print the parts and purchase a couple nuts and bolts. But overall cost is really inexpensive. Plus if anything breaks you can always print a new part!

Here is a list of parts that are needed to complete this project.

Printed Parts:
1 x Base (Added a second base option with larger peg holes for the "Mount Left and Right" if you print is too tight)
1 x Mount Left - Glue to "Base" part
1 x Mount Right - Glue to "Base" part
2 x Pivot 1
2 x Pivot 2
2 x Spacer 1
2 x Spacer 2

Bought Parts:
2 x M3 40mm bolt
2 x M3 nut
4 x M2 16mm bolt
4 x M2 nut
(you can use M3 bolts and nuts instead of M2, you just need to drill the holes a little bigger)

Bought or made Part:
2 x Push rods 28mm long from center of ball joint to center of ball joint
--- For the Push rod (the connection between the cantilever itself to the axle), I used the extra rod ends that you get when you buy a SCX10