KiwiFil Adapter for carboard 1kg and 250g spools in AMS or other dry box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made to fit cardboard rolls specifically KiwiFil 1KG and 0.25KG for use in BambuLab AMS or other rolls type dry box
- Rating
- 4 / 5
- Likes
- 6
- Downloads
- 95
- Makes
- 1
- Views
- 586
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Made this to suit my cardboard spools I buy from a local supplier and my AMS. I printed in PLA to start and also did one in PETG. Both worked great with no support needed at 0.2mm layer height. Has spikes to aid in gripping the cardboard as well as using the knurled edge from the original polymaker roll adapter.
Internal dimensions of cardboard spool:
Suits rolls with minimum 55mm Internal diameter of through hole but as its cardboard the sides are no so critical. Maximum is 80mm internal diameter as that is where the spikes are so you will loose some gripping power if bigger than that.
External dimensions of cardboards spool:
Ideally 200mm or just under 200mm as that is the size of this adapter but due to this being made for cardboard spools you can always cut the cardboard spool down so its 195mm and then the cardboard wont become an issue.
There are files for both 1kg and 250g rolls. Both use the same Female threaded part as the original cardboard rolls don't benefit from having the sleave all the way through.
Also made one with a built in desiccant holder using the spincycle model that I use for all my plastic spools in the AMS and storage.
