Purdue Hammer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modeled from scratch using my own machined hammer made in the ME 263 course at Purdue! Boiler up, hammer down, hail…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 79
- Makes
- 0
- Views
- 585
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- People
- License
- Creative Commons — Attribution
Modeled from scratch using my own machined hammer made in the ME 263 course at Purdue!
Boiler up, hammer down, hail Purdue!
Print Settings
Printer:
Tronxy X3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.1
Infill:
20
Filament:
Overture PETG
Black
Notes:
Handle printed in vase mode (spiralized outer contour) completely upright with 0.2 mm layer height and a large brim, but could theoretically be printed with infill or even solid. It's 295 mm tall so it just barely prints in my 300 mm tall build space!
Hammer head printed with ~20% infill and 0.1 mm layer height. Offset of the hammer head and handle is about 0.2 mm so the fit should be nice and tight but not too tight.Only issue I need to fix is the hammer handle doesn't have a top layer if printed in vase mode, so I might reduce the height of the handle and add a cap-like part to put in the top of the hammer head.
Category: Scans & Replicas