1 / 7
Donald J. Trump fridge magnet — image 1
1 / 7

Donald J. Trump fridge magnet

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

45th president of the United States of America as a fridge magnet

Rating
5 / 5
Likes
48
Downloads
357
Makes
2
Views
1,564
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

The pockets inside these models accept Ø6x4mm and Ø12x2mm magnets for the back and bottom positions respectively. It is best to keep the polarity of the magnets consistent between individual prints. In the double magnet version, the 6mm magnet should be inserted with a polarity such that it is slightly attracted towards the 12mm one.

3MF files include tested presets. Generally, use no larger than 0.4n and 0.2l. Some improvement in quality can be achieved with 0.15l. All models can be printed with 0% infill and 2 perimeters. Make sure to not overheat the magnets!

 

The use of Prusament Orange is mandatory :D.

Local (CZ/SK) magnet sources: Ø6x4mm | Ø12x2mm.

Tags