Strap Buckle (No Supports)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
There are two models, one with teeth and one without. I recommend the model with teeth. This will prevent slippage of…
- Rating
- 4.96 / 5
- Likes
- 364
- Downloads
- 2,033
- Makes
- 32
- Views
- 7,673
- Reviews
- 25
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
There are two models, one with teeth and one without. I recommend the model with teeth. This will prevent slippage of the straps.
Update 28SEP2018: I uploaded a strap keeper to hold the straps together.
Although it looks very similar to the original model, this is a complete redesign. I made some changes that suited me better. It has less play and self-centers when clicking the parts together. I also made the button smaller, although it's just as easy to use.
The buckle is self-tightening. The harder you pull it apart, the more engaged the locking mechanism becomes. Under load, it will not slip apart unless it catastrophically fails.The engagement has a very satisfyingclick when you connect the two parts together.
You could also use this as a belt buckle.
I have uploaded two models for each part. The only difference is the strap hole sizes. Most people will probably use the large size.
I printed these at 80% scale which produce a strap hole width of 21mm.
Native size produces a strap hole width of 27mm.
Please post your makes and comments!
Check out my other designs https://www.thingiverse.com/mistertech/designs
Print Settings
Printer:
Hatchbox Alpha
Rafts:
No
Supports:
No
Resolution:
0.20mm
Infill:
30% (probably doesn't matter)
Notes:
At 80% scale, it took 41 minutes to print a set.
Category: Replacement Parts