Christmas Arc Overhang Challenge
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.53 – €1.87 net (excluding VAT)
For file: christmas_hangover_challenge.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.70 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 2 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Put your printer to the test and see if you can print 90° overhangs with this Christmas-themed test print.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 80
- Makes
- 1
- Views
- 913
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
Print a Christmas tree using Arc Overhangs! Print using PLA on a printer with a 0.4mm nozzle.
Should work on most 3D printers double check the start-gcode to be safe. You may need to adjust temps, and flow.
Check the video to see how Arc Overhangs work.