2025 UPATED - Sponge holder for Camargue faucet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A sponge holder that fits on a 7x13mm cross bar of a sink faucet. See images for dimensions.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 31
- Makes
- 0
- Views
- 543
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
2025 UPDATE: The sponge holder has no rounded corners and edges. This avoid getting scratched on the sharp print corners.
A friend of mine had the idea for a sponge holder for his new tap at the kitchen sink. In the end we came up with this design.
The model is designed to fit a “Camargue” brand tap. Which is a cheap in-house brand of the German hardware store brand “Bauhaus”. I assume this type/model is also market in other countries or stores. The design should fit any model which has the required dimensions, see images for details. The bar bracket is designed with 7,5mm (0,5mm gap) because the bar varies in size.
Link to the product page of the tap:
https://www.bauhaus.info/spueltischarmaturen/camargue-spueltischarmatur-valencia/p/28995296
Assembly:
- 1x plate
- 2x side holder left (ideally one printed mirrored)
- 4x M3x10 screws
Print instructions:
- I recommend using a material that you can clean with warm water, like PET-G. But PLA should also work.
- See images for recommended printing orientation for the plate.
- I recommend mirror on of the side holders so you have smooth surfaces to both sides.
- No supports needed.
I would be happy to see some of your makes posted :)
Source files in the Alibre Atom format is available but the website does not allow the upload. If you need it send me a message.