Loupe, magnifying glass, LED with timer, Li-Ion battery.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Loupe magnifying glass, LED, with rechargable battery. 3D print : 3 lens diameters 20-22-27mm prefabricated, "do it…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 28
- Makes
- 0
- Views
- 335
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Loupe magnifying glass, LED, with rechargable battery.
3D print : 3 lens diameters 20-22-27mm prefabricated, "do it yourself" STL files are provided too for other diameters. Find a 20-30mm diameter achromatic optical lens. Thick lens needs no rings, for thin lense prepare a closing ring as well. Add 0.6-0.8mm to lens diameter. If it is tight, soften the PLA carefully with a hairdryer and push or glue the lens in position.
Electronics : Li-Ion battery 502030 size or Ipod 5 batteries fit in case. A timer circuit drives the LED, the C1 capacitor is charged through the pushbutton, opens the Mosfet and holds charge for a number of seconds.
Light goes out slowly as C1 discharges. 33nF gives about 10sec, 100nF 1 minute on-time.
No-timer version: connect the LED , switch and 22ohm resistor in series to battery.
Source Aliexpress, 3535 1W LED Chip, Tactile Switch SMD 2 pin 3x6x2.5MM, Micro USB 5Pin Female Welding Type
Solder thin wires on the components and glue them in the case. The switch may need adjustment, padding with paper adjusts gap.
Check if the charging works and close the case.
20 Feb 2021 : Added credit-card size Fresnel lens design.
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/1iE2vKu8Agq
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
Yes
Resolution:
0.2
Category: 3D Printing