Cooler Master, Masterbox Lite 3.1 Mesh-frame Upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Open up your suffocating pc case with this mesh-frame insert. My case was getting too hot when summer temps hit 93+F…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 461
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Open up your suffocating pc case with this mesh-frame insert.
My case was getting too hot when summer temps hit 93+F (34C) so i decided to do my first case mod on a new case,since the intake ports on the front face were anemic I cut a big trapezoid and needed a frame that would hold a mesh in place to keep the interior away from most dust and cat hair.
I ended up sliding some pantyhose over it and clicking it into the void I'd cut.
dimensions:
the full piece is meant to be 205mm along it's longest axis.
the two parts, for smaller machines are:
102mm side to side for the top section
113mm side to side for the bottom
i printed and used the bisected one because i wanted to check the tolerances on the joiner pieces. A little sanding of the insert on the centre may be needed depending on your material squish factor. Use some kind of adhesive
I used Protopasta's CF PLA for mine; can't imagine you having too much issue with any other material.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
.2-.16
Infill:
20%
Filament: Protopasta whatever CF PLA/black Post-Printing =============
Maybe sand a little bit to ensure tight fit for the 2-piece version.
How I Designed This
I started with the largest hole i was willing to cut into my case front and sized the mesh frame from there. I added cross-bracing for strength to help keep it from folding over during install.
Category: Computer