VOID9 Macropad
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The VOID9 Macropad is a handwired 3x3 pad that uses a Pro Micro as a controller.
- Rating
- 5 / 5
- Likes
- 93
- Downloads
- 741
- Makes
- 15
- Views
- 3,019
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The VOID9 Macropad is a handwired 3x3 pad that uses a Pro Micro as a controller.
Two versions for the top case are included, one of them is flat, the other has a 4mm fillet.
There are two versions for the bottom case as well, a flat one, and a 5 degree angled version.
Handwiring guide
I've put together a pretty visual handwiring guide for this macropad; the same principles would apply for larger projects, such as a VOID40.
Bill of materials Redux
- 6 x M2x3x3.5 OD heat inserts (aliexpress)
- 4 x M2x10 Allen head screws (aliexpress)
- 2 x M2x6 Countersunk screws (aliexpress)
Bill of materials v1
- 4 x M3x10 Allen head bolts (tme.eu/aliexpress)
- hotglue
STL mirror / QMK fork
The files are also hosted on Github, along with precompiled firmware files and a QMK fork that contains a basic keymap and experimental VIA Configurator support. More info here
Updates
- 31.01.2024 - added .step Redux models
- 14.06.2023 - added Redux models, modular controller mounts, m2 hardware and brass inserts
- 14.04.2020 - slightly increased outer wall thickness around the screw holes
- 16.03.2020 - added a small inner fillet