The Miser Brothers (Snow Miser / Heat Miser)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
They're too much! It's the Miser Brothers from the 1974 stop motion Christmas classic "The Year Without a Santa Claus".
- Rating
- 4.667 / 5
- Likes
- 60
- Downloads
- 233
- Makes
- 4
- Views
- 1,872
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
They're too much! It's the Miser Brothers from the 1974 stop motion Christmas Classic “The Year Without a Santa Claus” by Rankin/Bass Productions.
These models are based on vector images provided by ClipartWarehouse on Etsy and use layer-based colour changes through PrusaSlicer.
Printing Instructions
I've provided pre-sliced g-code files for a stock MK3S using generic PLA. There are two versions for each miser brother - one for a 0.4mm nozzle/0.20 layers and another for a 0.25mm nozzle/0.10mm layers. These g-code files already have the colour changes built in and ordered as follows:
Snow Miser: Clear → Black → White → Clear → Blue
Heat Miser: Clear → Black → White → Skin → Red → Orange
I printed both models scaled down to 80% on the X and Y axes and used a 0.25mm nozzle with 0.10mm layers to get the size/detail level I wanted.
If you're going to slice it yourself and want to scale the model up or down, just remember that only the X and Y axes should be changed. Leave the Z axis at 100%, otherwise the layers may not line up with the colour transitions properly.
Scroll through the photos for screenshots of the colour transition configurations - including transition heights - that I used in PrusaSlicer.