1 / 3
Bambu Lab refill adaper for "Das Filament"
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to fit the refill from "Das Filament" on Bambu Lab spooles
- Rating
- 4 / 5
- Likes
- 26
- Downloads
- 135
- Makes
- 1
- Views
- 1,225
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An adapter to match the larger inner diameter of “Das Filament” refills to the Bambu Lab Spooles. For conviniences it is possible to insert the RFID-Chips of the orginal Bambu Spooles in, the settings worke just fine for my tested PLA-filaments.
If you want to dismount the filament from the adapter, you can use the notches for cable ties.
Updates with V3:
- Reduced risk of tugging in on the sides during the first ~100g of filmament.
Updates with V2:
- Reinforcements for arms, to break less likely;
- Enlarged hole for filament end.
Maybe fits also other manufacturers, for reference, the inner diameter is 103mm