TLR 22 5.0 Elite Tower Guards
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are Front and Rear Tower Guards for the TLR 22 5.0 Elite
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 436
- Makes
- 1
- Views
- 1,886
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Tower Guards for the TLR 22 5.0 Elite.
I will add a rear guard soon and update the designs with version numbers if needed after some testing. This is designed to be attached with zip ties and I wanted good quality ties so I got “TY24MX Thomas & Betts Ty-Rap Cable Tie with Stainless Lock 5.50” (not in the photos) but try whatever you can get. I also suggest printing the part solid in CF Nylon but try out whatever you have and let me know how it goes.
There is a model with a built in single layer brim. If you have built plate adhesion issues it will help a lot. No Supports are needed.
Update 12/28/22:
Rear Guards have been added to the files. These are a tight fit and require the part to flex a bit to clip on. I suggest making the parts in solid PETG, Nylon or CF Nylon. They also use the same zip ties to hold them in place as the front guard.
Update 1/7/23:
I added a narrow version of the front tower guard. You wont be able to use the outer most shock position but it will narrow up the guard a little bit and still cover the tower.
Update 1/20/23:
Added rear guard versions that only have cutouts for 2 zip ties after feedback that 4 wasn't needed. Try it and see what works for you.