TLR 22x4 Tower Guards
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are Front and Rear Tower Guards for the TLR 22x4
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 309
- Makes
- 1
- Views
- 1,544
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Tower Guards for the TLR 22x4
I will add a rear guard soon and update the designs with version numbers if needed after some testing. This is designed to be attached with zip ties and I wanted good quality ties so I got "TY24MX Thomas & Betts Ty-Rap Cable Tie with Stainless Lock 5.50" (not in the photos) but try whatever you can get. I also suggest printing the part solid in CF Nylon but try out whatever you have and let me know how it goes.
There is a model with a built in single layer brim. If you have built plate adhesion issues it will help a lot. No Supports are needed.
Update 12/28/22:
Rear Guards have been added to the files. These are a tight fit and require the part to flex a bit to clip on. I suggest making the parts in solid PETG, Nylon or CF Nylon. They also use the same zip ties to hold them in place as the front guard.
Update 12/31/22:
I added a V2 model for the front tower guard that looks similar to the 22 5.0 front guard I designed. I think it looks a little better and it may be a little stronger.
Update 1/20/23:
Added a V3 model for the front tower guard after some feedback that the guard was a little loose. I just removed a little material underneath the guard to expose the tower more so the zip tie would pull it down better. I would use this model for the front.
Also added rear guard versions that only have cutouts for 2 zip ties after feedback that 4 wasn't needed. Try it and see what works for you.