Parametric Minidisc case

This is my own design that I'm copying over from Thingiverse here. (Created account here because I've been finding Thingiverse buggy).

This is a parametric (Fusion 360) model for a storage case that can hold minidiscs.

I've designed this to take various parameters, which enables you to change them and have the model automatically rebuild itself.

The values I used to build the STLs provided:

num_discs - Set this to the number of discs you want
disc_depth - 65mm (61mm without sleeves)
disc_height - set to 82mm (73.6 without sleeves)
disc_width - set to 9.5mm (6.6mm without sleeves)

If you would like to change dimensions, just set the them in the parameters list and re-export the STLs. (Make sure you make these slightly larger than the disc dimensions to allow for printer tolerances).
This will mean you'll need to edit the Minidisc Logo position.

I couldn't figure out how to position the Minidisc Logo SVG relatively in the model, so it's placed manually.
I've included the SVG file in case anyone wants to re-position it in the design.

Print Settings

Printer brand:

LulzBot

Printer:

TAZ 5

Rafts:

No

Supports:

No

Resolution:

0.38

Infill:

10%

Filament brand:

Ice Filaments

Filament color:

"Precious Pink"

Filament material:

PLA

Notes:

Printed with a 0.8mm nozzle.

I set some parameters (wall widths and separator widths) to be a multiple of my nozzle size (set at 1.6mm).
You may wish to use the Fusion 360 design file and change these to a multiple of your nozzle width, but it should also be fine without any changes.