3D Joe 9mm Re-loader
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.84 – €3.47 net (excluding VAT)
For file: 3D Joe 9mm Reloader v1 215-210 nozzle (supports)_0.15mm_PLA_MK3S_3h43m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.16 excluding VAT (range midpoint).
- Weight reported by the author
- 28 g
- Print time reported by the author
- 3.71 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
9mm re-loader to save your fingers. Fits most double stacked mags (tested on sig 365, taurus g3c, Canik)
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 134
- Makes
- 1
- Views
- 768
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
If you use the Gcode everything is ready to go for PLA
If not I use these settings:
Infill: 15%
Pattern: Gyroid
Supports: auto generate w/ overhang threshold set to 1 degree
Nozzle: First layer 215, other layers 210
If you have a prusa I use the .15mm quality settings and just adjust the temp for other layers and adjust the support settings. Im sure there are better settings. however this is my first ever upload im learning but I really like this product tested it now I would like to share it! Thanks.