1 / 2
Duct Flange - Fits 120mm PC Fan Profile and 4 inch AC Duct — image 1
1 / 2

Duct Flange - Fits 120mm PC Fan Profile and 4 inch AC Duct

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€3.40 – €4.16 net (excluding VAT)

For file: DuctFlange_ForFan_0.3mm_PETG_MK3S_3h16m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €3.78 excluding VAT (range midpoint).

Weight reported by the author
62 g
Print time reported by the author
3.27 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Flange that can be mounted onto a 120mm PC fan and then interface with a 4in" AC duct in order to vent exhaust outside.

Rating
5 / 5
Likes
59
Downloads
477
Makes
2
Views
2,012
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

Flange that can be mounted onto a 120mm PC fan and then interface with a 4in" AC duct in order to vent heat and fumes outside.

I am using thinkingalaud's original model  for the flange that faces outside, but needed to remix their model to properly interface with the 120mm fan I am using to create a negative pressure vaccuum in my printer enclosure. Otherwise, a good portion of the fan was blocked and air was escaping through the sides instead of into the AC duct.

Supports are needed only for the internal portion that interfaces the fan directly.

The fan I am using is a Noctua heavy duty fan, which creates enough static pressure to pull fumes through charcoal and HEPA filters. 

Tags