1 / 2
Holy IOT 18010 NRF52840 Programmer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a programming jig for the NRF52840 based Holy IOT 18010
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 568
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a programming jig to program the relatively inexpensive HolyIOT 18010 NRF 52840 chips.
This design requires pogo pins P50-B1 (0.5mm Length 16.35mm). The fit is very tight and I recommend re-enforcing your solder joints with epoxy as shown in my picture. If you need to program this chip, you will be able to figure out the pinout - but you can also ask me here and I help :).