1 / 2
Olympia XL Accessory Clamp Front
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1/4" Accessory mount for Olympia XL car frame.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 33
- Makes
- 0
- Views
- 150
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
This model is used to add a ¼" accessory bolt or nut to an Olympia XL Cart.
You need to print two, then bolt them together using an M5 bolt and nut. I use a 30mm or 35mm M5 bolt.
You can insert a ¼" nut or bolt - or one on each side!
I used a layer of .2, an infill of 50%, and a wall thickness of 2mm. Supports were on.
The original version of this tended to crack when bolted down firmly, hopefully, this does better.