1 / 7
MiSTer USB Plug Support
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Been seeing on the forums and video that the USB plug you use to add a hub to the MiSTer FPGA is fragile so I just…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Been seeing on the forums and video that the USB plug you use to add a hub to the MiSTer FPGA is fragile so I just designed a bracket to hold the plug I am using which is made by MakerSpot. I ended up having to add a washer between the bracket and the top plate. Holes are 1.5x15mm so I used 2x10mm screws I believe.
Make sure everything lines up if you use this.
Category: Electronics