Gearset Collection
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turns out, making good 3D printable gears is hard.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 145
- Makes
- 1
- Views
- 1,420
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
We've gone through dozens of iterations as we worked to strike the best balance between functional and feasible. If you're looking to do a few rotations or power a creation, you'll want to start here.
If you're enjoying models like this, please consider supporting us on Patreon so we can continue making great content for you. https://www.patreon.com/oddinventor
What's Included:
This collection features 3 different sized gears, a double-tapered thrust bearing, a spool assembly, crank, and various couplers/spacers/caps/and joints to build out your ideal gear ratio. All gears are of the double-helical variety, as we've found these are easy enough to print, provide the smoothest action, with the coolest cool-factor.
- Smallest (14 teeth)
- Middle (27 teeth)
- Largest (39 teeth)
- Middle Inline Bolt and Nut Joints
- 90 and -90 degree Twist Cube Joints
- Spacing and Flush gear couplers
- End Bolt Cap
- Crank and crank handle
- Spool body
- Gear Spacer
- Tapered Thrust Bearing (Body and Caps)
Additional Hardware Needed:
- M10 washers
- M10 Fender Washers (optional)
- M10 Nylon Lock Nuts
- M10 140mm Bolts
- 6000 Series Bearings
- 2x2 Lumber (for frame)
- 1" Deck Screws (for securing frame)
- 60x 8mm Ball Bearings (for the tapered thrust bearing)
- 3x M5x40 Socket-Head bolts (for the tapered thrust bearing)
- 3x M5 Nuts (also for the tapered thrust bearing)