1 / 1
1/2 inch / 13mm Irrigation Tube Bend Cap — image 1

1/2 inch / 13mm Irrigation Tube Bend Cap

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€0.78 – €0.95 net (excluding VAT)

For file: 13mm Irrigation Tube Bend Cap_0.2mm_PETG_MK3S_59m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.86 excluding VAT (range midpoint).

Weight reported by the author
9 g
Print time reported by the author
58.8 min
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

End cap for run of 13mm irrigation tube / pipe - insert and bend pipe back over to crimp the pipe and stop water flow.

Rating
0 / 5
Likes
3
Downloads
23
Makes
1
Views
309
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

End cap for run of 13mm irrigation tube / pipe - insert and bend pipe back over to crimp the pipe and stop water flow.   Benefit of using this instead of a plug is that it is easily removable without tools (and far simpler than a valve!)

Ensure you flip the STL file if using this - otherwise import the 3MF as this is the correct way around.

Tags