1 / 2
Sunton ESP32S3 8048s043c 4.3" Screen Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the Sunton ESP32S3 8048s043c_16MB - i use OpenHASP
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 881
- Makes
- 2
- Views
- 6,997
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
Sunton ESP32S3 8048s043c 4.3" Screen Case
Using OpenHASP https://www.openhasp.com/0.6.3/
For the back to screw on, I used M2x12 screws. You should be able to drill out the holes and use M3's if that is all you have. In the lid, use an 2.5mm drill bit, then the M3 bolt can self tap if you don't have screws.
I then use a 90deg USB-C adapter to make wire management better.
PRINTING:
I printed in Polymaker ASA - so if you print in PLA/PETG, fit might be a bit different (ASA/ABS shrinks a little).