1 / 3
Anti-roll for Luxorparts electric screwdriver — image 1
1 / 3

Anti-roll for Luxorparts electric screwdriver

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.36 – €0.43 net (excluding VAT)

For file: luxorparts_screwdriver_padding-Body_0.6n_0.3mm_PLA_MINI_26m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.39 excluding VAT (range midpoint).

Weight reported by the author
4 g
Print time reported by the author
26.4 min
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Anti-roll and tactile support for Luxorparts electric screwdriver available from kjell.com (article number 49180).

Rating
0 / 5
Likes
4
Downloads
27
Makes
0
Views
288
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

I created this model for the Luxorparts electric screwdriver available from kjell.com (article number 49180). It has two purposes: 

  1. Prevent it rolling off the workbench by having two bumps.
  2. Make it easier to operate by guiding the fingers to the buttons. Hopefully this make it possible to operate the screwdriver without having to look for the buttons.

The diameter is 16 mm.

Use some electric tape or similar to fasten the holder if it is loose.

Tags