1 / 5
Supereasy Gravity Tape-Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tape- and Solder-Spool holder. Easy and fast. Slide in from bottom, remove to top.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 19
- Makes
- 0
- Views
- 260
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Keeps your frequently used tape and solder spools organized and stored within touching distance. Store and remove it with one hand - in no time!
Assembly:
Print (PLA, 0,2mm layers, 23% infill):
- Tape Holder S (1x)
- Tape Holder S Arm (2x)
Bill of material:
- M3 x 16mm screw (2x)
- Washer 3mm (2x)
- Nut M3 (4x)
- (Optional: M3 x 12mm screws and M3 nuts for attaching multiple holders)
- Press a M3 nut into the pocket of each arm (as counterweight)
- Attach arms to tapeholder and fix each with M3 x 16 screw, washer and nut
- Attach your Spoolholder to a shelf or storage rack at your workshop
How to use:
Slide in your spool from below. Arms will fall down automatically after spool is in.
To remove a spool just slide it upwards and pull it towards you.