Customizable Sloped Curve Generator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Like thing:4694209 this is derived originally from thing:50249. However, this version is appropriate for making molds,…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 118
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Math
- License
- GNU General Public License v2.0
Like thing:4694209 this is derived originally from thing:50249. However, this version is appropriate for making molds, by allowing you to set a non-zero angle for the side walls. You set the thickness of the base, and the draft angle of the side. If you set too large a draft angle for the base and height you choose, you'll end up with an impossible shape.
rhodonea-5-7-2.2-18.stl is an example with the following parameters:
a = 5; b = 7; points = 2000; rose_thickness = 3; draft_angle = 2.2; rose_height = 18; rose_radius = 30; Note that this creates non-manifold models that need repair. I have not found a way to resolve this in OpenSCAD. Some slicers can handle it, many can't. It may be possible to repair with meshlab.
I have also implemented this in CascadeStudio which (unlike this OpenSCAD model) both renders practically instantaneously and produces manifold models. I strongly recommend using the CascadeStudio version!
Category: Math