Gastroback Waffle Maker Handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Its the Plasticpart from the Handle to turn the Iron around.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 265
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Its the Plasticpart from the Handle to turn the Iron around.
The .gcode is NOT for PETG, it's for XT-CF20, this seems to be a BUG in PrusaSlicer or the Homepage!
DON'T USE THE .GCODE WITH PETG!
Print instructions
You need to cut the Metalparts out of the old grip and put them in the new one. Everthing is very thight.
You need three M3 screws with nuts and a 3mm Drill to get the hole in the Metalplate.
I hope the picture explain the rest.
The .gcode is modified for Olsson 0,4mm Rubin Nozzle! (+5° on the Nozzle)
Due to the high temperature at the iron i have used colorFab XT-CF20.
I have printed it on the Steelsheet with Kores.