1 / 1
Raise3D E2 Bed Clamps
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
When printing large, dense parts out of ABS or PC, the bed will warp itself off the magnets. These clips help.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 47
- Makes
- 1
- Views
- 566
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
When printing large, dense parts out of ABS or PC, the bed will warp itself off the magnets. These clips help.
Print out of ABS, Polycarbonate or a CF/GF polymer. PLA or Nylon will not work well (former is too soft at high temp, latter is too flexible).
Print vertically so the clips are in their strongest orientation.
----
2022-12-31 UPDATE: we suggest printing in a CF filament - we've found that ABS at high bed temps will eventually deform and become loose.