1 / 4
Uniden SR30C Scanner Desktop Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Desktop Stand for Uniden SR30C Handheld Scanner
Print in standard upright orientation, no supports. I chose 30% infill to add some weight.
Print Settings
Printer:
Sindoh 3DWOX
Rafts:
No
Supports:
No
Resolution:
0.2 layer height
Infill:
20-30
Filament:
Sindoh PLA
Black
Notes:
My first print was usable, but the back plane of the 15 degree upright support had filament melting/drooping marks...suspect due to lack of cooling from fans on the front of the hot end assembly. Depending on your setup, you may want to print in an orientation that the back of the angled support plane gets proper cooling.
Category: Electronics