1 / 5
MTH DCS Remote Holder and Battery Companion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount holder for MTH DCS Remote for O-Gauge Model Railroad, with optional AAA battery holder companion. I used 1"…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall mount holder for MTH DCS Remote for O-Gauge Model Railroad, with optional AAA battery holder companion. I used 1" drywall screws to attach to layout fascia.
Print Settings
Printer:
Sindoh 3Dwox
Rafts:
No
Supports:
No
Resolution:
0.2 layer height
Infill:
15%
Notes:
PLA. I didn't use any rafts or supports and the holes came out fine printed vertically, but YMMV depending on your printer and material.
NOTE: Both STL previews are displayed upside-down for whatever reason. The battery holder has the holes in the top and none on the bottom. The remote holder has the screw holes nearest the top.How I Designed This
Category: R/C Vehicles