phone holder for big phone and big cable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With others phones stands i struggled to make the charger cable pass or fit so i made my own. i tried to make it the…
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 30
- Makes
- 0
- Views
- 198
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
With others phones stands i struggled to make the charger cable pass or fit so i made my own. i tried to make it the more compatible possible The photo is a custom version. there isn't the drawing in the original model
Light Update
i made a thin version faster, lighter, smaller but less solid
What that phone holder has?
-Has hole for cable, phone button and sound
-It's easy to stamp a stencil on it to customize it.
-Chonky enough to be solid.
-I tested it stability, it is quite stable
-No Support needed
-Print in one piece
Seizes:
Overall seize: 103 x 102 x 189
scaled for: 73.6 mm large • 158.5 mm height • 7.9 mm deep phone (whiout phone case) Smaller phone can fit
effective seize of the phone hole: 78mm large, 17mm deep, 132,8mm high
cable :
-5cm high between the supportand the base to not damge the cable by bending it.
-can fit a cable end of 2cmm long 1,5 cm large
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
Doesn't Matter
Supports:
No
Resolution:
1.5mm
Infill:
20% (can cause problem if under)
Filament: Polymaker PolyTerra pla Savannah Yellow
Notes:
the printer used is the anycubic Vyper but this was not a option
this model have tendency to warp. i recommend to use a brim if you have warping issues.
if the infill is too small the base will look like a baked pizza crust: a surface full of bubles
require bridge
Category: Mobile Phone