Phone Case with Mandalorian Honeycomb Logo - Huawei P20 Pro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I used a feature in PrusaSlicer, namely modifier meshes, to accomplish this look. First you load up the case file and…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 58
- Makes
- 0
- Views
- 471
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
I used a feature in PrusaSlicer, namely modifier meshes, to accomplish this look.
First you load up the case file and then add a modifier, loading the included logo.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.24
Infill:
100%
Filament: Amazon Basics PETG Blue PETG Blue
Notes:
As explained above, you need to load a modifier mesh with the logo and position it where you want.
**Case settings**- infill: 100%
- Top layers: 4
- Bottom layers: 3
- Perimeters: 3
Modifier mesh
- Use 20% infill with honeycomb pattern
- Set 0 top layers, 0 bottom layers
- Set perimimeters to 1
Or, just download the 3MF file and open it in prusaslicer. All settings should be filled in.
Post-Printing
Snap it on your Huawei P20 Pro!
It should fit like a glove.
Extra Ideas
Other phone models.
There are hundreds of phone cases on thingiverse and elsewhere.
You can do the same technique as described here on any combination of case and logo.
Post a make of what you made using this!
Category: Mobile Phone