Ejection Canister for Rocketry
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Used on many of my rockets. Currently 1g, 2g, 3g, 4g, 6g, 8g, and 12 g tube. Sizes are calibrated assuming 1g of FFFFg…
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 59
- Makes
- 0
- Views
- 365
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Used on many of my rockets. Currently 1g, 2g, 3g, 4g, 6g, 8g, and 12 g tube. Sizes are calibrated assuming 1g of FFFFg = approximately 1 cc. The bottom takes a #4 or M3 screw to hold it to the bulk plate. The hole at 45 degrees is for the wire to exit.
Printed with 40% infill for strength. So far these have withstood up to 8 uses. Will add any sizes you request.
You are using black powder - use at your own risk.
Print Settings
Printer brand:
Prusa
Printer:
Mk3s
Rafts: No
Supports: No
Resolution: .2mm
Infill: 40%
Filament brand: Overture
Filament material: PLA+
Category: Hobby