1 / 3
Foot for Tripp Lite Smart1500 UPS
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a "foot" for a Tripp Lite Smart1500 UPS. Print four of them to elevate the UPS 1 inch off the floor.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 162
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a foot for elevating a Tripp Lite Smart1500 UPS off the floor. I'm not sure it's necessary, but I feel better having the UPS up a bit.
The model is one inch, or 24.5mm, tall. It features a trapezoidal recess that fits onto the small molded “feet” on the bottom of the case. Print four of them, one for each corner, as shown.
Printed at .32mm layer height, 4 walls, 20% triangle infill. Probably overkill but UPSes are heavy. No supports. eSun black PLA.