PrusaMini DirectDrive OrbiterExtruder1.5 V6MountRemix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made it to make PrusaMINI+ direct drive. Thanks to the original data provider
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 21
- Makes
- 0
- Views
- 467
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
You can change from original data to OrbiterExtruder direct drive.
The Extruder fixing part is a separate part for easy printing.
The hotend is also V6 compatible so you can use a lot of parts.
I use REDLIZERD.
Parts required for assembly
M3x6
M3x8 2pc
M3x10
M3 insert nut 2pc
PTFE tube
Orbiter Extruder Version 1.5
Add to Start G-Code
M350 E16 ;micro stepping set to 16*
M92 E670 ;steps/mm - you may need to finetune it
M201 E3000 ;acceleration mm/s2
M203 E120 ;max speed mm/s
M205 E5 ;E jerk mm/s
M906 T0 E850 ;motor RMS current in mA*
M900 T0 K0.22 L0.02 ;linear advance values to be calibrated*
M207 S1.5 F7200 Z0.2 ;firmware retraction*
PrusamentPETG
Infill 20%
wall 3
ABS is recommended if you want to keep it light.