TriCairoPrism Puzzle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D polyform puzzle with 11 pieces and a storage box with a sliding lid.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 43
- Makes
- 0
- Views
- 241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
🧩 TriCairoPrism Puzzle
The puzzle consists of ten TriCairoPrism pieces, the DiCairoPrism piece DCP_01, and a storage box with a sliding lid.
Use TCP_01 to TCP_10 and DCP_01 for the puzzle shape in the box. The extra piece TCP_11 is only needed for the other shapes shown in the gallery.
🖨 Print Settings
Material: PLA · No supports · No raft or brim
You can ignore the slicer warning caused by the breakaway connection of the spring tabs underneath the lid.
🔧 Before Using the Lid for the First Time
Release both spring tabs before sliding the lid into the box. Otherwise, the lid may get stuck and become very difficult to remove.
Press the two spring tabs underneath the lid inward, one at a time, to release them. You should hear a small snap.
If a spring tab is difficult to release: Place a hard board on the table. Hold the lid on its edge and press the spring tab against the board to release it. Repeat for the other spring tab if needed.
The animation in the image gallery shows how to release the spring tabs.
🌐 More Polyform Puzzles and Background Information
🧩 More Polyform Puzzles on Printables
⚠ Safety Note
Choking hazard due to small parts. Not for children under 3 years.