1 / 1
P Branding Iron Prop
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a prop branding iron for the play Peter and the Starcatcher. Made to light up
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 1
- Views
- 241
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution
Print one of each part. Should print fine as aligned in the STL (mainly make sure the flat sides are down and you don't need supports). The rod may need a bit of a brim.
To make it light up I used 2 AA batteries and battery holder, 4 red LED filaments (130mm), and a push button switch. The P isn't super sturdy as I wanted it thin enough for the LED filament to show through.
If you have any questions feel free to ask. If you end up using it in one of your shows I'd love to hear about it.