1 / 2
Bevel gear - involute tooth system
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
The involute bevel gear is printed with PETG and need partially supports.
Assembly instruction
- remove support and deburr edges if needed
- prepare adjusting ring (2x) by adding a hexagon nut M3 and a countersunk screw M3x12
- prepare housing by adding hexagon nuts M3 (2x)
- add spacer to bevel gear (2x)
- insert bevel gear into bore
- add adjusting ring to shaft of bevel gear and adjust clearance
- insert second bevel gear to splitted bore of housing
- add clamp to fix bevel gear by using cylinder screws M3x20 (2x)
- add adjusting ring to shaft of bevel gear and adjust clearance
- perform a test run by using the hexagon e.g. with a cordless screwdriver