Hell Elmo (Helmo)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.57 – €6.81 net (excluding VAT)
For file: Helmo_5h38m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.19 excluding VAT (range midpoint).
- Weight reported by the author
- 89 g
- Print time reported by the author
- 5.64 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Helmo from the fiery pits!
- Rating
- 5 / 5
- Likes
- 40
- Downloads
- 237
- Makes
- 4
- Views
- 1,464
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
It's Helmo!
No MMU needed, I did color changes at different layers. If following the parameters below, the color changes should be at the listed layer height.
Color order:
Black
Orange @1mm, layer 5
Yellow @2.2mm, layer 11
Red @3mm, layer 15
White @3.8, layer 19
Orange @4.6mm, layer 23
Print parameters:
0.2 mm layer height
1 wall
15 top layers (for a solid print)
15 bottom layers (for a solid print)
No supports
Brim/Skirt up to you