JST-XH Extractor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is an easy to print and use extractor to remove cables from JST-XH (2.54 mm) connectors. Best way to print is…
- Rating
- 4.5 / 5
- Likes
- 56
- Downloads
- 398
- Makes
- 4
- Views
- 2,267
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Here is an easy to print and use extractor to remove cables from JST-XH (2.54 mm) connectors. Best way to print is like shown in thumbnail image. You might need to rotate object. Support is required for better dimension accuracy.
Can be printed with PRO PLA (3D870) or PETG. Both are flexible enough for this to work.
Layer height: 0.16 or 0.20 is ok
Perimeters: 3
Infill: 10%
Support: Yes (print same orientation as shown in picture)
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.16
Infill:
10%
Filament:
3d-fuel PRO PLA
Notes:
Perimeters: 3
Category: Electronics