Pegs/Hooks for Tool-less Metal Shelving Rack (Key-Hole Shape)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed some tool-less pegs that tightly slot into key-hole shaped legs on metal shelving (Muscle, Husky, REIBII, etc)
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 174
- Makes
- 0
- Views
- 1,396
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
These tool-less pegs/hooks are oriented in their intended print orientation for maximum part strength. I've had 1kg hanging on the end of the 50mm pegs/hooks for a couple days with no sign of breakage or drooping (have not limit-tested these). I have printed mine with PolyMax PLA, I recommend rigid filaments for this print.
Assembly:
1. Insert the “teeth/clip” side into the top(circular) part of the slot (May have to rotate 90 degrees to get it to fit)
2. Make sure the “teeth/clip” are squeezing the sheet metal, one half of the teeth should be on either side (inside and outside) of the sheet metal (Will be a tight fit)
3. Using a hammer or some sort of smashable weight, hit the peg/hook down into the bottom part of the slot
You are done! Instructions apply to all types of peg/hook listed here.
Types of Pegs/Hooks:
1. (Metal Shelving) 50mm Hook.stl - Extends 50mm straight out with a little lip at the end
2. (Metal Shelving) Hammer Hook.stl - Accepts hammers with throats max 40mm wide and 30mm deep (or other similar T-Shaped tools)
3. (Metal Shelving) 3.5mm Hole Peg.stl - Only the clip portion with a 3.5mm hole through it. Useful if you want to attach something with 3mm screws and nuts
4. (Metal Shelving) Peg Teeth Clip.stl/.stp - Only the clip portion, for your custom designs.
Request what other kinds of hook types should be made.
(2/26/2023 Update):
Added:
+(Metal Shelving) 50mm Hook Type B.stl {Larger Vertical for the hook to prevent things from slipping}
+(Metal Shelving) Hammer Hook Type B.stl {Larger Vertical for the hook to prevent things from slipping}
+(Metal Shelving) Phone Holder.stl {Sized for my Note 20 Ultra with Case, should be fine for most}
+(Metal Shelving) Retainer Case Holder.stl {Holds the old standard Invisalign retainer case}