1 / 3
FAST Flowrate Calibration Cube
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
Fine tune your first layer and calibrate your flow rate in 6 minutes.
This model uses only 0.7 grams / 22cm of filament. Print in vase mode.
Measure all 4 walls with calipers.
Standard wall thickness in PrusaSlicer with 0.4mm nozzle is supposed to be 0.45mm.
(0.45 / Average wall thickness measured) * current flow rate = new flow rate.
Example:
Current flow rate in filament profile: 1.00
Measured values of walls: 0.43 / 0.44 / 0.46 / 0.44 → average: 0.4425
0.45 / 0.4425 = 1.017
1.017 * current flow rate = new flow rate = 1.017 → set in filament profile and save.