Motivational Plaque
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.20 – €1.46 net (excluding VAT)
For file: Excellence_Plaque_0.2mm_PLA_MK3S_1h21m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.33 excluding VAT (range midpoint).
- Weight reported by the author
- 16 g
- Print time reported by the author
- 1.36 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
For the desktop or notice board, this one best printed with the base either in silk white or silk light silver and the…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 76
- Makes
- 0
- Views
- 658
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
For the desktop or notice board, this one best printed with the base either in silk white or silk light silver and the text in silk black or silk dark yellow or gold.
Two gcode files at different resolutions, the 0.15mm one produces slightly better text quality.
It's the sheen of the silk PLA which gives it the edge...
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Resolution:
0.2mm and 0.15mm
Infill:
15%
Filament: Generic Silk PLA Silk white or silk silver for the base and silk dark yellow / gold, or silk black for the text.
Notes:
There is a pause point set in both gcode files for when the filament colour needs to be changed.
If there is any stringing...
If there is any stringing encountered in the text, a fine craft knife/ #11 scalpel blade will help.
Use of a hot air blower could also help, but be careful not to heat the print too much as the print will warp - about 150Deg C and a fast airflow works well.Category: Office