Hyperpixel 4 Touchscreen External Lack Enclosure Frame Prusa MK3S
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Used to mount the hyperpixel 4" touchscreen display alongside the MK3S LCD outside the lack enclosure.
- Rating
- 4.429 / 5
- Likes
- 79
- Downloads
- 356
- Makes
- 6
- Views
- 5,056
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Used to mount the hyperpixel 4" touchscreen display alongside the MK3S LCD outside the lack enclosure. I used a raspberry pi 4, no cable extensions needed for the prusa lcd screen.
Line the bottom of the mount base flush to the bottom of the lack table to insure clearance of the doors.
The print pictured above is in Red PETG by SPOOL3D, I used 0.10mm detail setting in prusa slicer but the gcode uploaded is for 0.20. Can used PLA if you wanted to this is just what I did.
Cheers!
Print instructions
Category: 3D Printer Accessories Summary
Used to mount the hyperpixel 4" touchscreen display alongside the MK3S LCD outside the lack enclosure. I used a raspberry pi 4, no cable extensions needed for the prusa lcd screen.
Line the bottom of the mount base flush to the bottom of the lack table to insure clearance of the doors.
The print pictured above is in Red PETG by SPOOL3D, I used 0.10mm detail setting in prusa slicer but the gcode uploaded is for 0.20. Can used PLA if you wanted to this is just what I did.
Cheers!
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Supports: No
Filament: SPOOL3D PETG Red