Gitarrestütze / Guitar Support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
more and more especially classical/acoustic Guitarists are using Guitar Supports instead of the traditional foot stool
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 74
- Makes
- 0
- Views
- 1,025
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Share Alike
more and more Guitarsupports are used especially by classical/acoustic players.
this model is mounted with 3M SJ 3550 Dual Lock tape ( or similar ) on the guitar and can easily be dismounted again. But the Advantage is that the support can stay stay on the guitar when not played, because in all Softbags and in many(not all!) Hardcases there is enough room to store the guitar with support. There is no need to mount or dismount the support everytime when playing and the tape works much more reliable than succion cups etc.
additional you need the tape, a 50mm strong strap (i got it from a tailor), 2 M3x30 Screws with 2 locknuts, 4 hexagonal M3x10 Screws, 4 threaded M3 inserts for the thumbscrews (compare the picture). Mount the Thumbscrews the same way you see ont the black model, because the bigger ones can supply more torque.
I printed it in PLA or Extrudr GTPro, use more Perimeters and a higher infill.
You will only need a small support when printing GitSt Gelenk, print it sideways.