mAx Team Aero Wing Mirror Upgrade for 3D SETS Model 14 (Max Team) (new version v2/20230115)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Transform your 3D SETS Model 14 Max Team as the mAx Team van with a 1 color 3D printer
- Rating
- 4 / 5
- Likes
- 30
- Downloads
- 206
- Makes
- 3
- Views
- 1,244
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Warning
Only the right side has been printed (the left is a mirror operation).
Definition
C1 is the bottom color, C2 the middle one and C3 the top one.
Printing
Is required the same printer size than 3D SETS has defined.
Use the same setting than 3D SETS for the same parts (including color change).
For the Aero Wing Mirror and the Wing Mirror, the mirror face should be on the bed .
Infill 100% for the Aero Wing Mirror and 15% for the Wing Mirror.
Build
Support should be removed for the doors.
The build required extra screws to assemble the Aero Wing Mirror ; 4 M2x10 (2 for the left side and 2 for the right side).
Feedback
It is welcome.
Remark
None.
Version
v1/20221231 1st upload.
v2/20230115 a smaller aero wing mirror positioned higher on the doors.