RC Drift Tires (12mm Hex)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drift Tires for all 1/10 RC-Cars with an 12mm hex nut.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 174
- Makes
- 0
- Views
- 1,182
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- GNU General Public License v2.0
Drift tires for all 1/10 RC cars with a nut width of 12mm.
I recommend printing with support structures everywhere. I used PLA for the print, to increase the life I recommend PETG. In order to save material, the infill can be reduced. I also recommend using the wheels only on smooth surfaces, as very rough asphalt damages the plastic too much.
If you need an adjusted geometry, like a different outer diameter or a different width, you can write to me personally. Then I can adjust this in CAD and upload it accordingly.
If you have any suggestions for improvement or similar, please write them to me in the comments. I am always grateful for feedback.
Greedings Simon