Mini Screwdriver
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mini screwdriver that uses a standard 608zz bearing.
- Rating
- 5 / 5
- Likes
- 59
- Downloads
- 188
- Makes
- 3
- Views
- 1,349
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I designed this mini screwdriver after scrolling through Instagram and seeing a bunch of those EDC tools. I took it on as a challenge to see if I could design one myself and 3d print it. I present to you the Mini Screwdriver. For the bearing I decided to use a 608zz bearing since I had a bunch laying around and I figured most others do as well. Standard ¼" bits fit into the end of the screwdriver held in by a fairly snug fit and a magnet. Check the parts list below for everything in the build, I also included a half section view for assembly purposes.
BOM
- Mini Screw Driver
- Mini Screwdriver Bearing Spacer
- Mini Screwdriver Bearing Cap
- 608zz Bearing
- M3 Heat Set Nut
- M3 x 16mm Socket Cap Screw
- 1/8" OD x 1/16" Thick Round Magnet
- Glue (For backside of magnet)
The mini screwdriver can be used with or with out the cap. I also included a stand for organizing and displaying the mini screwdrivers.