Haribo 3030 X-axis with belt tensioner and cutouts for couplers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the remix of the original x-axis from Prusa with additional belt tensioner. If you have Haribo and original…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 267
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is the remix of the original x-axis from Prusa with additional belt tensioner. If you have Haribo and original Prusa motors (with integrated rod), it works fine, but when you have steppers and Z threaded rods connected using couplers, it's not possible to lower the Z axis enough to reach the bed. One solution is to raise the bed by couple of mm, my solution is to modify x-axis motor mount and idler with cutouts for couplers.
The original files were modified by extending the width of part by 2.5 mm, moving x-axis endstop and shorting bearing holders on x-axis to acomodate couplers. Max coupler diameter is 25mm.
The source files are available on Github
Print Settings
Printer:
Haribo
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Notes:
PETG
Category: 3D Printer Parts